• State Resolved
  • Locked Locked
  • Replies 3 replies
  • Subscribers 34 subscribers
  • Views 689 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SN6501-Q1: Trans Driver

user1154870
Prodigy 65 points

Part Number: SN6501-Q1
Other Parts Discussed in Thread: SN6501

No trans driver with 1A and Automotive spec exist.

I plan to add FET buffers to SN6501-Q1.

Are ther any problems

  • 0
    TI__Intellectual 2325 points
    Hello dear user,

    Thanks for posting your question on E2E!

    Depending on your requirements and timeline, we can potentially solve this in two different ways:

    Option 1: An SN6505 based solution (can do 1A). As of today this is non-Q1, but we can discuss solutions for this over email or via Private Message (PM).

    Option 2: We can look at your SN6501 + buffers based proposal and provide detailed feedback on that if you'd like. Depending on _how_ this is implemented, some of the 6501 limitations may persist (Rds_on, drive strength). Again, this can be done over PM or email to protect your solution.

    Is it okay for me to send you a friend request to discuss this further ?
    Best regards,
    Abhi
  • 0 in reply to Abhi Aarey
    TI__Intellectual 2325 points
    Hi ,

    Thank you for accepting my request ! PM Sent.
    We can continue discussions over PM/email .

    For the benefit of others reading this post, at the end we can discuss and post a brief summary as appropriate.

    Thank you,
    Abhi
  • 0 in reply to Abhi Aarey
    TI__Intellectual 2325 points
    Dear user,

    Thanks for the offline discussion. To summarize for others, we are essentially sticking to the two solutions mentioned above in the first reply. For clarity, I will mark that post as the answer.

    Best regards,
    abhi