DS90UB954-Q1: STP cable requirement

Tomoaki Yoshida91

Genius 5255 points

Part Number: DS90UB954-Q1

Hi team,

Our customer will use 953 and 954 with STP.

Is there a required specification for selecting cables?

Although it is supposed to be less than 5m, in some cases a case that it becomes a little longer is assumed.

Best regards,

Tomoaki Yoshida

over 7 years ago

0 Palaniappan Manickam over 7 years ago

TI__Genius 10475 points

Yoshida-san,
We have a channel specification document that covers information such as cable return loss for the 953/954 system. This document needs to be shared offline as its under NDA restrictions. Please contact your local TI Sales/FAE so you can obtain this information.

0 Tomoaki Yoshida91 over 7 years ago in reply to Palaniappan Manickam

Genius 5255 points

Hi Palaniappan-san,

Thank you for your support.

I understand this matter.

Does that information are scheduled to be released to the public, such as being described in the data sheet?

I think that it is necessary information to actually use.

Best regards,

Tomoaki Yoshida

Interface

Interface forum

DS90UB954-Q1: STP cable requirement