• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 33 subscribers
  • Views 413 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS90UB913Q-Q1: DS90UB913/914 programming guide

Kailyn Chen
Genius 9560 points
Part Number: DS90UB913Q-Q1


Hello,

More and more customers who use the FPD- link products, like DS90UB913/914， DS90UB953/954. They mainly asked some questions about the programming information,  for example the detailed configuration procedure. Do we have some programming guide for these products? Or do you have some advice? 

Best regards

Kailyn

  • 0
    TI__Mastermind 30515 points

    Hi,

    please check the d/s on how to use UB913a/UB914a, we have mode_sel pin to select the work mode. for most cases, UB913a/UB914a system don't need any reg. setting. If you can read some status from UB913a, you should set the I2C pass through in reg., TI provides one app. note on it. You can search it in d/s on I2C operation.

    For the link UB953/UB954, TI's provide app. note on how to bring up UB953/954 system in my.ti.com, you can search the app. note or the on-line video on how to use the device UB953/954. It is similar as other FPD-Link devices.

    regards,

    Steven