• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 33 subscribers
  • Views 427 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SN65DP159: Eyescan useage with our custom board

mike damiano
Prodigy 10 points

Part Number: SN65DP159

We are using the sn65dp159 on our board and would like to see the eye pattern.  Is there a way to use the eyescan tool with the totalphase aardvark?  If not, if we purchased the sn65dp159 evaluation board could we connect it to our board to get the eyescan software working with the USB TI chip to i2c generator to our board?

Mike

  • 0
    TI__Guru 60870 points

    Hi Mike,

    We don't have source code to share for EyeScan, but if you can access the I2C on your board you can jumper it to pin 1 on J4 / J6 of the DP159 EVM (don't install any jumpers) and you will be able to run EyeScan on your board.

    Let me know if you have any issues.

    JMMN