TPIC8101EVM: Unble to launch TPIC8101EVM application.

Kim Keng Teo

Part Number: TPIC8101EVM

Dear Sir/Madam,

I have just received my TPIC8101EVM Rev C from Mouser today and i am trying to link up to the UI from my laptop. When i clicked on TPIC8101EVM application, it showed me an error "ERROR - TIGER: ERROR: *** WRITE to SB --HID-- *** Commnd = 0xB."

The light indicator on the Tiger board is not blinking and is showing green.

Your help is greatly appreciated. Thank you.

over 6 years ago

0 Clancy Soehren over 6 years ago

TI__Mastermind 23810 points

Kim,

Have you tried running the GUI in compatibility mode? You can also try running it as administrator.

Also, I will contact you separately to give you instructions on how to reload the firmware of the TIGER board. I've seen that cause problems before.

-Clancy

0 Kim Keng Teo over 6 years ago in reply to Clancy Soehren

Prodigy 45 points

Hi Clancy,

Thank you.

Best regards

TEO KIM KENG

0 Kim Keng Teo over 6 years ago in reply to Clancy Soehren

Prodigy 45 points

Hi Clancy,

Can i have the instruction on reloading the firmware for the Tiger board. The EVM is still not working. Tha

0 Clancy Soehren over 6 years ago in reply to Kim Keng Teo

TI__Mastermind 23810 points

This was resolved offline. Kim, please let me know if you have any trouble.

0 Kim Keng Teo over 6 years ago in reply to Clancy Soehren

Prodigy 45 points

Hi Clancy,

Thanks for the firmware update and it works after i updated it using your attachment and instruction. Thanks for your help. Attached is my screenshot with the board connected.

Because of the holidays, TI E2E™ design support forum responses will be delayed from Dec. 25 through Jan. 2. Thank you for your patience.

Interface

Interface forum

TPIC8101EVM: Unble to launch TPIC8101EVM application.