• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 33 subscribers
  • Views 399 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS90CF384A: documentation on

Ilaria Milesi58
Prodigy 10 points
Part Number: DS90CF384A
Other Parts Discussed in Thread: DS90CF384, DS90CF386

Hello,

I'm looking for some technical documentation about electrical connections for this IC. I mean:

1) which is the best value of capacitance to put on power supply

2) voltage range for PLL Vcc

3) can I just draw a wire from my transmitter to this device LVDS receiver or do I net to put some resistance

Usually this information can be found in the datasheet, but not in this case, could you please point me toward a more descriptive documentation?

A link would be fine

Thanks

Ilaria

  • 0
    TI__Expert 4555 points

    Ilaria,

    Table 5 and Figure 9.2 on pages 15 and 17 of this document should be able to point you some reference for the schematic design of this device: http://www.ti.com/lit/ug/snlu032a/snlu032a.pdf                                    

    The device featured in this document is actually the DS90CF386, which is nearly identical to the DS90CF384 except that it has a larger throughput (2380Mbps vs 1800Mbps) and a higher max pixel clock rate (85MHz vs 65MHz), however I think you should be able to find some useful information to help you with your task. If you have any more questions feel free to come back to this forum or create a new thread.

    Best Regards,

    Jonny