looking for and 10Gbps ethernet data recovery

Vincenzo Pizzolante

Other Parts Discussed in Thread: DS125DF111

hi,

I'm looking for a 10Gbps ethernet data recovery (compensate the backplane routing).

It has to be SFF-8431 compatible, because we would like to use before an SFP+ module (between FPGA SerDes and SFP+ module).

any advice would be more than welcome

thanks a lot in advance

Vincenzo

over 7 years ago

0 Ross Pimentel over 7 years ago

TI__Mastermind 23675 points

Hi Vincenzo,

Moving this thread to a different forum so that it gets more visibility.

0 Ross Pimentel over 7 years ago

TI__Mastermind 23675 points

Hi Vincenzo,

I am not an expert in our reclocker/timer group but I did see this part that supports SFF-8431.
www.ti.com/.../support

0 Nasser Mohammadi over 7 years ago in reply to Ross Pimentel

TI__Guru* 93670 points

Hi Vicenzo,

Please let us know how many channels or how many CDRs per device you are looking for.

Also, please note the following device - DS125DF111. This device has two channels but each one is in a different direction.
www.ti.com/.../ds125df111.pdf

Regards,,nasser

Interface

Interface forum

looking for and 10Gbps ethernet data recovery