XIO2001: xio2001 power on/off issue

Shu-Cheng LIN

Guru 11785 points

Other Parts Discussed in Thread: XIO2001

art Number: XIO2001

Hi Sirs,

Sorry to bother you

We find some modules will occur glitch on PCI_RST-L when system power off (the attached waveform CH4, green color)

We would like to know why glitch occur and how to fix?

over 6 years ago

0 Ikechukwu Anyiam over 6 years ago

TI__Mastermind 35130 points

Hi Shu-Cheng,

Are they able to check if the glitch occurs if they use one of the pull-up's (R451 or R403) instead of the BJT+MOSFET network above?

Regards,
I.K.

0 Shu-Cheng LIN over 6 years ago in reply to Ikechukwu Anyiam

Guru 11785 points

Hi Sirs,

Thanks for your quick reply.

Please refer our update as below

R451 or R403 are reserved location, so we doubt the glitch occur is from bridge IC

0 Ikechukwu Anyiam over 6 years ago in reply to Shu-Cheng LIN

TI__Mastermind 35130 points

Hi Shu-Cheng,

I'm not sure I understand the update. From the waveform it looks like maybe the pull-up on PRST is too strong, so I wanted to see what would happen if they used one of the 10k pull-ups (they're currently not installed) instead of that circuit they're currently using. In fact, the datasheet says that no pull-up resistor is needed on this pin, so are they also able to check if the glitch occurs if PRST is connected directly to the device?

Regards,
I.K.

0 Ikechukwu Anyiam over 6 years ago in reply to Ikechukwu Anyiam

TI__Mastermind 35130 points

Hi Shu-Cheng,

Is the customer still having issues with this?

Regards,
I.K.

0 Shu-Cheng LIN over 6 years ago in reply to Ikechukwu Anyiam

Guru 11785 points

Hi Sirs,

Thanks for your help.

Actually i'm not get customer feedback.

I close this topic first.

If there have others update in future i will to open the new topic.

Thanks!!

Because of the holidays, TI E2E™ design support forum responses will be delayed from Dec. 25 through Jan. 2. Thank you for your patience.

Interface

Interface forum

XIO2001: xio2001 power on/off issue