• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 34 subscribers
  • Views 404 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

UCC5350: What to do with PIN7 if not used?

Naser S.
Genius 11605 points

Part Number: UCC5350

Customer uses the gate driver UCC5350MCD. What needs to be done with PIN7 (Miller CLAMP) if this feature is not used? At Pin7 nothing is connected

Pin 7 e.g. with a 10k0 pull on GND / Vcc, or leave open?