• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 33 subscribers
  • Views 319 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS65982: Active contract and Sink request registers description

Alexander Chamara
Prodigy 120 points
Part Number: TPS65982
Other Parts Discussed in Thread: TPS65981EVM

Hello,

I have TPS65982 chip connected to MCU through I2C bus. And I need to read out 0x35 (Active Contract RDO) and  0x36 (Sink Request RDO) registers. What exactly I need is to get status of "Capability Mismatch" flag but in "Technical Reference Manual" there is no information in what position it's placed inside 4 bytes data. Could you point me where can i get this info?

Thank you.

  • 0
    TI__Mastermind 36756 points

    Hi Alexander,

    If you have a TPS65982EVM with an FTDI chip, or a TPS65981EVM that comes with the FTDI you can enter debug mode using our GUI tool to see exactly what information is available in these registers. The capability mismatch would be bit 26 of register 0x35 and 0x36.

    If this answers your question, PLEASE select This resolved my issue

    Thank you,

    Eric