Looking for UFP side solution that support USB PD and QC3.0

Rocky Chen

Other Parts Discussed in Thread: BQ25895, TPS65987D

Hi,

Looking for a UFP side solution that integrated USB PD controller and QC3.0. Would you please give some recommendations?

If no integrated, how about the split solution? Will it be like TPS6598x and BQ25895? What is the feasibility about this solution?

Thanks a lot!

-Rocky

over 6 years ago

0 Eric Beljaars over 6 years ago

TI__Mastermind 36751 points

Hi Rocky,

Unfortunately, we do not have any QC3.0 PD controllers as QC3.0 does not follow the USB PD Spec. However, if you are looking for a compliant UFP PD solution. I would recommend the TPS65987D.

If this answers your question, PLEASE select This resolved my issue

Thank you,
Eric

0 Rocky Chen over 6 years ago in reply to Eric Beljaars

TI__Expert 7225 points

Hi Eric

Can I use this TIDA http://www.ti.com/tool/tida-01582?keyMatch=TIDA-01582&tisearch=Search-EN-Everything to meet USB PD and QC?

Thanks!

-Rocky

0 Eric Beljaars over 6 years ago in reply to Rocky Chen

TI__Mastermind 36751 points

Hi Rocky,

The USB PD Controllers from TI do not support QC as this does not follow the USB PD Spec.

Thank you,
Eric

Interface

Interface forum

Looking for UFP side solution that support USB PD and QC3.0