• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 33 subscribers
  • Views 415 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS80PCI402: Leakage current of PRSNT when VIN = 0V

Jim CHEN
Expert 4795 points
Part Number: DS80PCI402

Dear Team,

I would like to know is there any leakage current pass through PRSNT when VIN is 0V?

I only found the information as below. But not sure it is the same as what I thought.

Please help to advice. Thanks.

  • 0
    TI__Guru* 93670 points

    Hi Jim,

    Normally there is a weak pull-down resistor on logic inputs. This is typically in order of 60K to 130K-Ohm. Normally low logic state is in order 0 to 0.7V. Therefor the leakage current - for example - is in order of 0 to 0.7/~100K.

    Regards,,nasser