TUSB3210: [TUSB3210]Some questiones of USB-TO-GPIO

Steven Rogers86

Part Number: TUSB3210

Hi all,

Good day, i'd like to repair TI usb-to-gpio by myself, I find there is a mcu & eeprom in there , so does anybody know how to program(TUSB3210) & eeprom to repair TI USB-TO-GPIO if i replace a brand new TUSB3210? What should i do to make my USB-TO-GPIO workable,thanks.

Does someone have experience to repair USB-TO-GPIO?

over 7 years ago

0 Ian Bower over 7 years ago

TI__Genius 17090 points

Let me ask an expert if it is set up to do that. I know that you can update the eeprom from the GUI. You may want to look at the TUSB3210 and see how it interfaces to the EEPROM. I believe that there's a bootloader in the TUSB.

0 Steven Rogers86 over 7 years ago in reply to Ian Bower

Intellectual 350 points

HI,

THERE IS NO REPLY SINCE 120 HOURS AGO,DOES EXPERT IN HERE?

0 Steven Rogers86 over 7 years ago in reply to Ian Bower

Intellectual 350 points

HI,

IT SHOWS ERROR LIKE THIS WHEN I RUN EEPROM BURNER SETUP.EXE,WHAT SHOULD I DO? THANKS.

0 Steven Rogers86 over 7 years ago in reply to Ian Bower

Intellectual 350 points

DOES ANYBODY KNOWS?THANKS.

0 Yitzhak Bolurian over 7 years ago in reply to Steven Rogers86

TI__Mastermind 18370 points

We have never fixed these adaptors and have no experience with that process.
At this point the best option seems to be ordering a new adaptor.

0 Amiel Hussain over 7 years ago in reply to Steven Rogers86

TI__Expert 4070 points

Hello,

Under the Fusion tools menu you will find a tool called TI USB Adapter Firmware Download and you can pick a version like 1.0.11. Let me know if this helps.

Interface

Interface forum

TUSB3210: [TUSB3210]Some questiones of USB-TO-GPIO