• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 2 answers
  • Subscribers 33 subscribers
  • Views 784 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS90UB948-Q1: What is the meaning of "SWAP" and "Replicate" ?

Went Cao
Genius 5550 points
Part Number: DS90UB948-Q1

Dear All

        In the datasheet of DS90UB948-Q1,in No.39 page, "Table 8. Configuration Select (MODE_SEL0)", metion "SWAP" and "Replicate", what is the meaning ? I can't find any detail information about them.

  • 0
    TI__Expert 8135 points
    Hello-

    In Dual OLDI output mode, the data coming to RIN0 is forwarded to OLDI output port0 while the data coming to RIN1 is forwarded to OLDI output port1.
    In the Dual SWAP output mode, data on the output is swapped (switched), so the data coming to RIN0 is forwarded to OLDI output port1 while the data coming to RIN1 is forwarded to OLDI output port0.

    In Replicate mode, the data that is forwarded to OLDI Port0 is replicated (copied) to OLDI Port1 as well.

    Regards,
    Davor
  • 0 in reply to Davor Glisic
    Genius 5550 points

    Thanks a lot