DS25BR204: Unstable output signal

David C

Part Number: DS25BR204

Hello,

I'm working on a LVDS repeater DS25BR204. I am having a hard time getting a stable output signal. My input signal is 0.8 - 2.0V 10 MHz. Should the input voltage have less swing, or should frequency be higher.

Regards,

David

over 6 years ago

0 Nasser Mohammadi over 6 years ago

TI__Guru* 93670 points

Hi David,

Maximum differential input voltage is 1V.
Also, as long as you are DC coupling 10MHz should be fine.

Regards,,nasser

0 David C over 6 years ago in reply to Nasser Mohammadi

TI__Expert 3350 points

There is where I get confuse in the datasheet. It said VIL max is 0.8, VIH min is 2.0. but then max differential is 1V.

0 Nasser Mohammadi over 6 years ago in reply to David C

TI__Guru* 93670 points

Hi David,

VIL max = 0.8V and VIH min = 2.0V are for LVCMOS inputs. Meanwhile 1V max differential input is for the high speed LVDS inputs.

Regards,,nasser

Interface

Interface forum

DS25BR204: Unstable output signal