HD3SS3220: Initial Routing

Shmuel Davis

Part Number: HD3SS3220

I am using the HD3SS3220 in my design to MUX my USB 3.0 Type C signals. We have just completed the initial routing of the USB signals. Is there someone from TI who can check this routing for me ?

over 7 years ago

0 Brian Zhou over 7 years ago

TI__Guru*** 146515 points

yes, ask local FAE to submit routing review

0 Shmuel Davis over 7 years ago in reply to Brian Zhou

Expert 2930 points

How is this routing review different to a schematic review ? In the design \ research stage TI readily offered a schematic review for this device via this forum(via personal email) and the customer support was excellent as we had direct connections with TI engineers who understand the chip \ component and the TI response was very fast and accurate. This is something that is VERY valuable and now of the utmost importance in the design stage that we are at !!!! ?????

0 David (ASIC) Liu over 7 years ago in reply to Shmuel Davis

TI__Guru**** 177656 points

Shmuel

I accepted your request, please go ahead and send me your schematic/layout and I will review them.

Thanks

David

0 Shmuel Davis over 7 years ago in reply to David (ASIC) Liu

Expert 2930 points

Dear David,

Thank you - do you have a private email I send to ?

Shmuel

0 David (ASIC) Liu over 7 years ago in reply to Shmuel Davis

TI__Guru**** 177656 points

Shmuel

This E2E thread is being handled directly through email.

Thanks
David

Interface

Interface forum

HD3SS3220: Initial Routing