TPS25740B: TPS25740BEVM-741

Nikhil Joji

Part Number: TPS25740B

I have a doubt in configuring the TPS25740BEVM-741 . it has two connectors, J7 and J8 for HIPWR and PCTRL configuration. I didn't understand which of those pins to connect to configure it to P1 and H1. Kindly help me configuring

/ 26

over 7 years ago

0 Eric Beljaars over 7 years ago

TI__Mastermind 36756 points

Hi Nikhil,

The expert for this device is currently out of the office. I will make sure he responds to your thread when he returns.

Thank you,
Eric

0 Darwin Fernandez over 7 years ago in reply to Eric Beljaars

TI__Mastermind 41800 points

Hi Nikhil,

I can see how the EVM may seem confusing. Looking at the user's guide, the Table 3 with Section 4.2 may help a bit more. So from the schematic:

For P1 - jump pins 4 and 6
For H1 - jump pin 4 and 6

Please let us know if this helps! Thanks!

Interface

Interface forum

TPS25740B: TPS25740BEVM-741