• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 33 subscribers
  • Views 472 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SN75DP159: SN75DP159 40 pin & 48 pin different

user4979899
Expert 3080 points
Part Number: SN75DP159

Hi Sir,

As my understand there are 3 different in pin strap mode between SN75DP159 40 pin & 48 pin version,

(1) CEC_EN

(2) TX_TERM_CTL

(3) SWAP/POL

But all of these 3 pins can be use in I2C mode, correct?

  • 0
    TI__Guru 60870 points
    Hi Anne,

    CEC_EN is not a pin strop option, it is an output and it is not available in the smaller package. The TX_TERM_CTL and SWPA/POL can be set by I2C in the RSB package or left to their default state.

    Regards,
    JMMN