ISO1540: ADuM1250WSRZ repalcement

sundy xie

Intellectual 525 points

Part Number: ISO1540

Dear,

We want to replace ADuM1250WSRZ with ISO1540.

Could you help to check if ISO1540 support hot swap function? Thanks!

over 7 years ago

0 Abhi Aarey over 7 years ago

TI__Intellectual 2325 points

Hi Sundy,

Thanks for using our forum and for considering our ISO1540 device!

Please see this link for more details on the hot-swap :
e2e.ti.com/.../663416

Regards,
Abhi

0 Abhi Aarey over 7 years ago

TI__Intellectual 2325 points

Hi sundy,

If you need any additional questions answered, please let us know.
Also, can you please share more details about the customer's end application needs? That may also help clarify if hot swap is really needed or not.

BTW, here is an additional link if you are interested:
e2e.ti.com/.../438966

Thanks,
Abhi

0 sundy xie over 7 years ago in reply to Abhi Aarey

Intellectual 525 points

We want to know Y or N.

0 Abhi Aarey over 7 years ago in reply to sundy xie

TI__Intellectual 2325 points

Hi Sundy,

This feature is not advertised in the datasheet - so the short and conservative answer to this question is a "No".

However, this is a somewhat strict view of the part. In reality, the implementation in the 1540 depends on the end application. As documented in the threads linked above the part can successfully work in a fair amount of hot-swap applications without issues.

If you/your end customer would like to use this part, and the Hot-swap feature is a must-have, we'd be more than happy to work with you and dig deeper into the end application and give a more in-depth assessment.

Regards,
abhi

Interface

Interface forum

ISO1540: ADuM1250WSRZ repalcement