SN65DSI84: two Single-Link

NAOKI AOYAMA

Guru 11215 points

Part Number: SN65DSI84
Other Parts Discussed in Thread: SN65DSI85

Hello,

Sorry for my repeated question.

The customer tested with below register setting.

0x10 bit 6:5 set 10

0x18 bit 4 set 0

Then the same clock is output from A_CLKP/N and B_CLKP/N.

Is this correct function?

I think the pixel data is output only A_YxP/N.

Best Regards,

Naoki Aoyama

over 7 years ago

0 Ikechukwu Anyiam over 7 years ago

TI__Mastermind 35130 points

Hi Naoki-san,

0x10 bit 6:5 is only available for writing for the SN65DSI85. These bits are reserved for the SN65DSI84 and should not be changed from their default value. The SN65DSI84 does not have a two single-link operating mode since it only has one DSI channel.

Regards,
I.K.

0 NAOKI AOYAMA over 7 years ago in reply to Ikechukwu Anyiam

Guru 11215 points

Hello I.K.-san,

Thank you for your reply.
I understood the SN65DSI84 can not output two single-link LVDS.

Thanks,
Naoki Aoyama

Interface

Interface forum

SN65DSI84: two Single-Link