SN65DP159: About SN65DP159 model

Vera Mao

Part Number: SN65DP159

hi dear supporting team,

could you help provide the AMI mode/pin delay filel of DP159 with package loss compensation? and it seems DP159 has no JTAG, how to do test in ICT process? tks!

over 7 years ago

0 JMMN over 7 years ago

TI__Guru 60870 points

Hi Vera,

The model is available here: www.ti.com/.../toolssoftware

There is no JTAG available for the DP159, it doesn't support ICT.

Regards,
JMMN

0 Vera Mao over 7 years ago in reply to JMMN

TI__Expert 5065 points

Hi JMMN,

is this model including the package delay/insertion loss? tks!

0 JMMN over 6 years ago in reply to Vera Mao

TI__Guru 60870 points

Hi Vera,

No, it does not.

Regards,
JMMN

0 Vera Mao over 6 years ago in reply to JMMN

TI__Expert 5065 points

Hi JMMN,

if you do not have the model with the package compensation, could you help estimate how much loss it should be? tks!

0 JMMN over 6 years ago in reply to Vera Mao

TI__Guru 60870 points

Vera,

We do not have an insertion loss models for redriver / retimers.

Regards,
JMMN

Interface

Interface forum

SN65DP159: About SN65DP159 model