• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 33 subscribers
  • Views 485 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TUSB1210: TUSB1210 power up timing for ULPI clock output mode

kerr chang
Genius 4075 points
Part Number: TUSB1210

Hi Team

          Could you help provide TUSB1210 power up timing for ULPI clock output mode? 

SPEC page 12 is Clock input mode

  • 0
    TI__Guru 60870 points
    Hi Kerr,

    The difference from page 12 is in the COLDRST section, this occurs:

    Output Mode: When an input clock is detected on REFCLK pin (after 4 rising edges) then CLOCK will change to an output.

    Regards,
    JMMN