Hi,
What will happen if we connect a PD compilant sink device to the TPS258020? Will the TPS258020 source it maximum current allowed by CHG config? or will the PD device source the minimum allowed for a non PD compilant source?
Best Regards,
Juanjo
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
What will happen if we connect a PD compilant sink device to the TPS258020? Will the TPS258020 source it maximum current allowed by CHG config? or will the PD device source the minimum allowed for a non PD compilant source?
Best Regards,
Juanjo
Yes, the power delivery compilant system to which the system will be pluged is a Dual Role Port.
I assume that the current negotiation could be done, I am right¿
Best regards,
Juanjo
Hi Darwing,
We have made a set up with our prototype. But we are having some issues with the TPS258020 behaviour.
We use a 5.1KR Pulldown resistor in CC1 line for testing purposes. During the test stage, when the device was powered, SINK signal going LOW.
Once we test every signal and everything was ok, we remove the 5.1KR resistor and we test the prototype against several PD compiland Dual Role systems, but the prototype is not delivering power (SINK signal is not going LOW).
Do you know what could be the issue here?
Regards,
Juanjo