DS90UB933-Q1: Added reference to Power over Coax Application report

Kuramochi Tadahiko

Hi,

I'm checking where updated point of datasheet.

However I can't find the difference with "SNLS546A" on "Added reference to Power over Coax Application report" as below.

933DS.xlsx

Could you show me updated point?

Best Regards,

Kuramochi

over 7 years ago

0 Palaniappan Manickam over 7 years ago

TI__Genius 10475 points

Kuramochi-san,
This is the PoC app note that is being referenced to:
www.ti.com/.../snla224.pdf

This is not specific to the 933 device, the app note is written for 913A but the PoC concept still applies. I can file a request to have the datasheet link in section 8.1.1 corrected to say 913A instead of 933.

0 Kuramochi Tadahiko over 7 years ago in reply to Palaniappan Manickam

Guru 28715 points

Show me updated point.

They look like same.

0 Palaniappan Manickam over 7 years ago in reply to Kuramochi Tadahiko

TI__Genius 10475 points

Hello,
It is the same. This may not have been included properly in the Rev A revision history when this app note link was added.
I filed an internal request so we can actually correct the link to say DS90UB913A.

Interface

Interface forum

DS90UB933-Q1: Added reference to Power over Coax Application report