DS90UB954-Q1: Questions for DS90UB954-Q1 Resolution Supported

UB953 and UB954 is one pair of SerDes which has CSI2 I/f, only data throughput is cared when assess whether the assigned video can be transmitted via UB953/ub954 or not. so for the resolution mentioned above, if calculating the total data bandwidth, it can be supported by UB953/UB954 without any issue. also, no special setting is required for this resolution.

best regards,
Steven

Hi Steven,
Thanks for the quickly reply, can you also kindly help to provide the calculation method to check the bandwidth margin based on customer's resolution?
Thanks a lot!

the specific data rate is based on the video source NOT on FPD-Link, the payload video pixel clock is 2560x960x30, not much higher (less than the d/s claims of UB953/UB954).

best regards,
Steven

You can refer to UB953/UB954 d/s, which has detailed example script for reference, such as:
1. how many CSI2 lanes are selected and how to set the forwarding from FPD-Link to CSI2.
2. FPD-Link port setting and remote I2C access (such as I2C pass-through enabling etc.)
3. hard pin setting based on UB953/UB954 mode_sel setting.

best regards,
Steven