• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 33 subscribers
  • Views 296 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TCA9803: Timing Requirements

Takashi Yamaguchi
Genius 13310 points
Part Number: TCA9803

Hi team,

I received a question about TCA9803 from my customer.

The datasheet describes a Timing Requirements in the page 6.  Is this for output requirements?  If so, where is the Input requirements described in the datasheet?

Regards,

Yamaguchi

  • 0
    TI__Guru 62920 points
    Hello Yamaguchi-san,

    You are correct that the switching characteristics shown in the datasheet refer to the device's outputs. There aren't any special requirements on the input timing. The device is just a buffer (rather than I2C slave) so there isn't an SDA/SCL timing relationship required, and each input can recognize when signals cross the switching threshold regardless of the signal slew rate/transition time.

    Regards,
    Max