DS90UB926QSEVB: DS90UB926QSEVB/NOPB has no WIN7 driver

user4946324

Prodigy 140 points

Part Number: DS90UB926QSEVB
Other Parts Discussed in Thread: ALP

We've just bought DS90UB926QSEVB/NOPB and DS90UB925QSEVB/NOPB ;

But, we don't know where the driver is!

Even more， there is a AT90USB128 DFU, are your guys forgot to download the firmware?

over 7 years ago

0 Steven(Shenzhen) Shi over 7 years ago

TI__Mastermind 30515 points

can you provide the evm board picture? we need know what is the version you are using.

best regards,
Steven

0 user4946324 over 7 years ago in reply to Steven(Shenzhen) Shi

Prodigy 140 points

925&926 EVM pictures as below:

0 Steven(Shenzhen) Shi over 7 years ago in reply to user4946324

TI__Mastermind 30515 points

Hi, two solutions:
1. please check the "help" under ALP on USB driver issue, you can download it from Crypress website on the new USB driver and then tri it. if successful, you can use the on-board USB-I2C tool.
2. you can ask local TI support resource to get one "USB to Any" box, and then visit these two EVMs through the ISC connector (white connector in the same line of fakra connector).

best regards,
Steven