DS250DF810: Signal quality

AJ Cheng

Genius 3615 points

Part Number: DS250DF810

Hello.

Can I use the DS250DF810 to confirm the signal quality at the input(Rx side)?

over 6 years ago

0 Nasser Mohammadi over 6 years ago

TI__Guru* 93670 points

Hi AJ,

Yes you can use HEO/VEO measurement to check input signal quality. Please refer to the DS250DF810 programming guide for details.

Regards,,nasser

0 AJ Cheng over 6 years ago in reply to Nasser Mohammadi

Genius 3615 points

Dear Nasser.

Good day.

I can't find the programming guide on website. But I have seen from the SigCon GUI that there is HEO / VEO in Device Status. We need to know if input is PRBS9 then what kind of data value is good. Thanks for kindly help~

0 Nasser Mohammadi over 6 years ago in reply to AJ Cheng

TI__Guru* 93670 points

Greetings AJ,

Programming guide is part of design documents on a secure web site, Please register at TI.com, send me email, and provide background on your project as well. Here is the email address: Nasser.mohammadi@ti.com

Regards,,nasser

Interface

Interface forum

DS250DF810: Signal quality