• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 32 subscribers
  • Views 338 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TUSB3410 basic setup

Anwar Mathe
Prodigy 40 points
Other Parts Discussed in Thread: TUSB3410

Hi

I would like to know how to implement the basic usb-uart system using the given windows drivers and my microcontroller. I just require that data be transfered from the microcontroller to my pc using the chip.

I have look at the datasheet, but I do not quiet understand the basic requirements. 

thanks  

  • 0
    TI__Genius 16430 points

    Anwar,

    You will need to connect the serial data lines of the TUSB3410 to the correct serial lines on your MCU.  We can review your schematic for you if you post it to this thread.

    The software needs to be installed on the PC - note that what is downloadable is a two step process - the first SETUP.exe only places files in your Program Files folders.  There is a second SETUP.exe located there that actually installs the drivers appropriate for the OS in use.

    I would recommend viewing the TUSB3410 Implemnetaion Video for additional information.