• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 32 subscribers
  • Views 279 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS65988: TPS65988

Pekka Uotila
Prodigy 120 points
Part Number: TPS65988
Other Parts Discussed in Thread: TUSB1064, TPS65987D

Dear TI Sirs

TPS65988 component have dual PD controller.

I am wondering is it possible to control with single TPS65988 component Displayport Alternate mode Sink (TUSB1064) and Source (TUSB1046)  interfaces operating concurrently  or should both Alternate Mode  interfaces have their own separate PD controller like TPS65987D and Alternate Mode redrivers/retimers?

Best Regards Pekka

  • 0
    TI__Mastermind 36751 points

    Hi Pekka,

    Yes, the TPS65988 can enter a different DisplayPort mode on each port independently. So yes, one port can be configured to work with TUSB1046 and the other with TUSB1064. You can use GPIOs to control the TUSB muxes or you can use the I2C master interface on the TPS65988.

    If this answers your question, PLEASE select This resolved my issue

    Thank you,
    Eric