DS90UB964-Q1: connect to I.mx6q

Xiao Zhu2

Hello Team

When use 964 connect to i.mx6, there some issue just like the following link problem.

When used CSI 3 lanes, the imager is ok, but change to 4 lines, there some noise at the imager. Could you help look about it and give some comment ?

Thanks.

over 7 years ago

0 Palaniappan Manickam over 7 years ago

TI__Genius 10475 points

Hello,
Can you make sure the CSI throughput from IMX6 is correct and also it does not exceed the CSI bandwidth supported by the 964?
What is the 964 output data format and is the IMX6 side matching it?
Please read the registers 0x73 to 0x76 on 964 for the line count and line length and see if it changes.

0 Steven(Shenzhen) Shi over 7 years ago in reply to Palaniappan Manickam

TI__Mastermind 30515 points

It is due to I.MX6's limitation. 3lanes solution is ok for such case.

regards,
Steven

Interface

Interface forum

DS90UB964-Q1: connect to I.mx6q