TPS25740B: Reason for NRND

Kenji Ohno1

Genius 5095 points

Part Number: TPS25740B
Other Parts Discussed in Thread: TPS25740, TPS25741A, , TPS25740A, TPS25741

Hi Team,

I know that the USB PD Source Controller is all NRND.

(TPS25740,TPS25740A,TPS25741,TPS25741A,TPS25740B)

I think that these products are not so old. Why did it become NRND?

I would like to know the reason.

Best Regards,

Kenji

over 5 years ago

0 Mon2 over 5 years ago

Prodigy 220 points

Guessing that it is due to the lack of PD 3.0 compliance for the NRND devices. Current spec is PD 3.0.

0 Darwin Fernandez over 5 years ago in reply to Mon2

TI__Mastermind 40650 points

Thank you Kumar for answering!

Hi Kenji,

Kumar is correct, if your application requires PD 2.0, then you can use the TPS25740B; however, this IC would probably not pass the latest PD3.0 (since the standard is continuously evolving).

Interface

Interface forum

TPS25740B: Reason for NRND