• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 34 subscribers
  • Views 470 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MC3486: internal PU high in input/out

Shu-Cheng LIN
Guru 11785 points

Part Number: MC3486

Hi Sirs,

As title.

Does MC3486 have internal 5V pull high on I/O?

We wish the output level can same as input because output will connect to 3.3v MCU.

Thanks!!

  • 0
    TI__Guru 62920 points
    Hi Shu-Cheng,

    When outputting a high level, the "Y" output pins will pull the line up to the VCC voltage, which should be 5 V (+/- 5%). So, to connect to a 3.3-V MCU input I would recommend implementing level shifting. Please let me know if this isn't clear or if I have mis-understood your question.

    Regards,
    Max