SN65DPHY440SS: ESD protection for device

Kay Chen53

Part Number: SN65DPHY440SS
Other Parts Discussed in Thread: ESDS302, ESD204, ESD321

Hi there:

Customer side is under using our SN65DPHY440SS for camera MIPI re-timer, small failure with no DBP/N input or DAP/N output (9/100), any suggestion for their design for ESD solution or Cap for small signal?

3482.Camera.pdf

over 7 years ago

0 Brian Zhou over 7 years ago

TI__Guru**** 153700 points

what do you mean small failure?

0 Kay Chen53 over 7 years ago in reply to Brian Zhou

Expert 2225 points

Hi Brian:

Such as no input or no output case.

0 Brian Zhou over 7 years ago in reply to Kay Chen53

TI__Guru**** 153700 points

can you submit helpme ticket ? sps09.itg.ti.com/.../NewForm.aspx

0 Cameron Phillips over 7 years ago

TI__Genius 12410 points

Hello,
General ESD recommendation would be ESDS302 for high protection. It should support data rate of 1.5Gbps.
Also if you want single channel the ESD321 would work for this application. And if you want to have 4 channel ESD protection ESD204 would work as well.

Interface

Interface forum

SN65DPHY440SS: ESD protection for device