Linux: Is it possible to use two different IP address for OMAPL138 Eval OMAPL138 SoC Board?

Mitesh Hiran

Other Parts Discussed in Thread: OMAPL138, OMAP-L138

Tool/software: Linux

Hi There, I am using OMAPL138 SoC on TI Eval board and i'm wondering if there is a way to add 2nd IP address on the Linux side?

I am currently using SDK processor_sdk_rtos_omapl138_5_01_00_11

Regards,

Mitesh

over 7 years ago

0 Mitesh Hiran over 7 years ago

Mastermind 6265 points

Actually, its SDK v4.0.0.4

0 Sahin Okur over 7 years ago in reply to Mitesh Hiran

TI__Mastermind 27355 points

Hi Mitesh,

Which version of Processor SDK Linux are you using? Is it v4.0.0.4 as well?

0 Mitesh Hiran over 7 years ago in reply to Sahin Okur

Mastermind 6265 points

Hi Sahin,

yes Linux SDK is v4.0.0.4.

0 Sahin Okur over 7 years ago in reply to Mitesh Hiran

TI__Mastermind 27355 points

Hi Mitesh,

There is only ethernet port on the OMAP-L138 LCDK, but you could probably use a USB to ethernet dongle to get a second port and IP address. It would have to be on a different subnet. This wouldn't be supported by TI though.

0 Mitesh Hiran over 7 years ago in reply to Sahin Okur

Mastermind 6265 points

Oh okay, thanks for your reply. Cheers.

Interface

Interface forum

Linux: Is it possible to use two different IP address for OMAPL138 Eval OMAPL138 SoC Board?