Other Parts Discussed in Thread: TCAN1043
Hi Champs,
Customer wants to determine when device is in Stand-by mode, whether it shifts due to Power-up event or Wake-up Request event.
May I confirm if my understanding is correct about event indicator, which described in Table 1 of TCAN1043 datasheet?
"When device is in Stand-by mode, nFAULT and RXD signal indicate the causing event as below.
- nFAULT ="H" when caused by Power-up event, while nFAULT=L by Wake-up Request event
- RXD=H when caused by Power-up event, while RXD=L by Wake-up Request event"
Best regards,