• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 33 subscribers
  • Views 333 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

DS16F95QML: Is DS16F95QML cold sparing?

DS16F95QML: DS16F95QML

steven Schell
Prodigy 10 points
Part Number: DS16F95QML

Is it safe to operate the DS16F95QML with no Vcc applied yet 3volt logic applied to the receiver inputs

  • 0
    TI__Guru 62930 points
    Steven,
    This condition will not harm the device.
    This can be seen from the absolute max ratings table.
    Input Voltage for Bus terminal is listed as +15V/-10V. If there was conditional to VCC, it would be listed here.

    For example, many devices have ESD structures on inputs and outputs to VCC and GND. In these cases, the limit would be something like -0.5V to VCC +0.3V.

    If this answers your question, please click "Verify it as the answer"
    Regards,
    Wade