• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 33 subscribers
  • Views 300 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

THS8200: THS8200, DO pin application, CLKIN input circuit design

huhutu
Prodigy 245 points
Part Number: THS8200

Hi,

I am using THS8200 in my product.

I wonder how to use these DO Pins and why have to use this, for what  kind of application? 

Moreover, is there anything for me to pay particular attention for CLKIN's input circuit. Or just matching the two-side level signal is okay?

  • 0
    TI__Guru 65405 points
    Hello,

    I would like to inform you that THS8200 is Not recommended for new design NRND. Therefore the support is extremely limited.
    Nevertheless I suggest to look at the datasheet Table 3-1 at:
    www.ti.com/.../ths8200.pdf
    where you can find description of DOx pins - TU-R.BT656 compliant video data output port. Only available when ITU-R.BT656 input format is used. Can be used to connect to external PAL/NTSC video encoder. This port is off by default and should be activated by an I2C register setting.

    Regards,
    Tsvetolin Shulev