DS90UB954-Q1: Customer is looking for recommendations and collateral for a 3rd party SoM with Integrated Display

Carolus Andrews

Part Number: DS90UB954-Q1

Team,

I have a customer currently working with the above product and wanted to know if we recommend or have any collateral/reference designs demonstrating a CSI-2 capable display at the end of the chain? Do we have any collateral such as this with a 3rd party display?

over 6 years ago

0 Charley Cai over 6 years ago

TI__Genius 12866 points

Typically 954 CSI-2 output will go to a SOC. It might be possible to display the CSI-2 output to a PC.

0 Vishy Viswanathan over 6 years ago in reply to Charley Cai

TI__Mastermind 21685 points

>>>>It might be possible to display the CSI-2 output to a PC.

Cypress CX3 is an example that provides CSI to USB3 bridging capability in case customer wants to explore this option

www.cypress.com/.../ez-usb-cx3-programmable-mipi-csi-2-usb-30-camera-controller

Thanks

0 Carolus Andrews over 6 years ago in reply to Vishy Viswanathan

TI__Mastermind 22385 points

Vishy and Charley,

Thanks for the response. You both mention that is may be possible to output to a PC. Do we have any collateral that might help the customer achieve this? Is something such as the above mentioned module needed to to perform this?

0 Carolus Andrews over 6 years ago in reply to Carolus Andrews

TI__Mastermind 22385 points

Team,

Just wanted to see if I could get your thoughts on the above?

0 Vishy Viswanathan over 6 years ago in reply to Carolus Andrews

TI__Mastermind 21685 points

Carolus,

For a SOC with collateral, I would recommend looking at the following TI design which can be used with TDA2x/TDA3x EVMs

www.ti.com/.../tiduct0.pdf

DS90UB960 is quad channel (vs UB954).

Thanks,
]Vishy

Interface

Interface forum

DS90UB954-Q1: Customer is looking for recommendations and collateral for a 3rd party SoM with Integrated Display