Hi team,
If customer wants to save GPIO pin to control OE pin of TS3USB31E, can they directly tie it to ground? In this case, the device will still shut down the switch when Vcc<2.25V and directly open when Vcc>2.25A?
Thanks.
Max
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi team,
If customer wants to save GPIO pin to control OE pin of TS3USB31E, can they directly tie it to ground? In this case, the device will still shut down the switch when Vcc<2.25V and directly open when Vcc>2.25A?
Thanks.
Max