DS90UB913A-Q1: DS90UB913A ID[x]

Steven He92

Expert 2125 points

Part Number: DS90UB913A-Q1

Dear Sir,

My customer would refer DS90UB913A EVM to do design.

But He saw EVM_ID[x] resister setting different with datasheet table, the question is:

1. EVM setting is 10Kohm + 0ohm, what is address value & VID[x] ratio ?

2. 10Kohm + 0ohm have another benefit?

Thanks!

Steven

over 7 years ago

0 Charley Cai over 7 years ago

TI__Genius 12866 points

Hi,
I think the schematic capture is actually 914A EVM. On the 913A EVM user's guide, both 913A and 914A schematics are on there.
Please double check.

In this case, the 914A is strapped to 7bit address of 0x60 or 8 bit address of 0xC0

Best Regards,
Charley Cai

0 David Chien46 over 7 years ago in reply to Charley Cai

Prodigy 60 points

Hi Charley
Thanks your replay.

From TI official website download about EVM data source & datasheet version 2013-2016 can found ID[x] suggest setting is 10K with 0R,but from TI official website download the new datasheet version 2013-2018 the ID[x] suggest setting is open with 0R.

I just want to check our design need follow which database.

0 Steven He92 over 7 years ago in reply to David Chien46

Expert 2125 points

Dear Charley,

May I have your private mail for customer's circuit review.
Thanks!
Steven

0 Charley Cai over 7 years ago in reply to David Chien46

TI__Genius 12866 points

Please follow the latest datasheet.

Best Regards,
Charley Cai

0 Charley Cai over 7 years ago in reply to Steven He92

TI__Genius 12866 points

Please go through your local TI field office for circuit review.

Best Regards,
Charley Cai

Interface

Interface forum

DS90UB913A-Q1: DS90UB913A ID[x]