• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 33 subscribers
  • Views 356 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SN55LVDS31-SP: Function Table 1 has two G Enables, no Gbar

Ted Wolfe
Intellectual 260 points
Part Number: SN55LVDS31-SP

Table 1 of the datasheet appears to have an error, both Enable columns are designated 'G'.  I assume the 2nd 'G' column heading should be 'Gbar' to agree with the logic diagram on page 2?

Thanks, Ted

  • 0
    TI__Guru 62930 points
    Ted, thanks.

    I agree, the second entry for G in table 1 should have the overbar.

    This will be put in queue to be updated for next revision of the datasheet.

    If this answers your question, please click "Verify it as the answer"
    Regards,
    Wade