DS90UB953-Q1: Dual deserializers?

Bob Hund

Intellectual 1570 points

Part Number: DS90UB953-Q1

Can DS90UB953-Q1 be connected to 2 deserializers for data logging? Any other device avilable doing that?

over 6 years ago

0 Hamzeh Jaradat over 6 years ago

TI__Guru** 108520 points

Hello Bob,

you can pair the 953 with a 954 in replication mode, where you can use one CSI out of the 954 for data logging.

0 Bob Hund over 6 years ago in reply to Hamzeh Jaradat

TI__Intellectual 1570 points

Hi,

Yes. But if the receiver are located on different units? Does Ti have a devise that can split the camera data into 2 receivers? one is obviously for logging purpose...

thanks

BR
/Bob

0 Hamzeh Jaradat over 6 years ago in reply to Bob Hund

TI__Guru** 108520 points

The only possibility is to use an additional Serializer to send the data from one Deserializer output into another receiver.

Interface

Interface forum

DS90UB953-Q1: Dual deserializers?