• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 33 subscribers
  • Views 397 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS65982: About HRESET, MRESET and RESETZ

Roy Hsu
Genius 9390 points
Part Number: TPS65982

Hi Team,

I've read through the datasheet trying to understand how the three reset options of the TPS65982 work but still don't have a clear idea as in how/when I should use them. Could you please explain it for me?

It'd be great if you could use a real application as an example. Let's say, an UFP with 5V/3A sink required, DP alternate mode support.

Thanks!

Roy Hsu

  • 0
    TI__Mastermind 36756 points

    Hi Roy,

    These signals are only required in TBT designs that also have a TBT controller in the system. For a UFP with 5V/3A sink required, there should be no need to use any of the Reset signals.

    If this answers your question, PLEASE select This resolved my issue

    Thank you,
    Eric