TCAN1042HG-Q1: Power supply solution

Fandy

Part Number: TCAN1042HG-Q1
Other Parts Discussed in Thread: TCAN4550

Hello

As I see, TCAN1042x series did not integrated power supply, do you have below CAN solutions: Output 5V voltage with en/disable control,capable >250mA, support CAN FD,

over 7 years ago

0 Eric Hackett over 7 years ago

TI__Guru 74372 points

Fandy,

At the moment, the only CAN device with a voltage output integrated that TI has available is the TCAN4550. This device is a CAN controller and transceiver integrated as well though, not just a transceiver with an integrated power supply.

Can you explain the application in a little more detail?

Regards,

0 Fandy over 7 years ago in reply to Eric Hackett

Expert 2285 points

Hi Eric

Did Ti have similar solution with NXP's CAN SBC, Like TJA1075/6

0 Eric Hackett over 7 years ago in reply to Fandy

TI__Guru 74372 points

Fandy,

I wasn't able to find the TJA1075/6 on the internet, but I was able to find the UJA1075. We don't have anything released at the moment that can be a direct replacement of this device, the closest would be the TCAN4550, but even this solution would not be a suitable replacement in most cases. This would require multiple devices from TI in one solution, we don't currently offer anything integrated with all the features of the UJA1075.

Regards,

Interface

Interface forum

TCAN1042HG-Q1: Power supply solution