SN65DSI86: Hsync pin on the eDP display panel

EngHW

Part Number: SN65DSI86

Hi,

I am using SN65DSI86 as DSI to eDP converter. My eDP panel has Hsync pin on the interface connector, but the SN65DSI86 doest not have the Hsync pin on it. What is the function of Hsync and where should I connect it on SN65DSI86 IC (To GPIO3?)

Thanks in advance.

over 6 years ago

0 David (ASIC) Liu over 6 years ago

TI__Guru**** 176106 points

DSI86 does not use HSYNC, so you don't have to connect HSYNC from DSI86 to eDP panel. But I don't know if the eDP panel itself has a particular requirement for this signal.

Thanks
David

0 Nasser Mohammadi over 6 years ago in reply to David (ASIC) Liu

TI__Guru* 93670 points

Hi Peter,
It's been more than three days with no update or response to this case. I am assuming this issue is now resolved. We close this case for now. Please re-open this case when you have a new update related to this issue.
Regards,,nasser

Interface

Interface forum

SN65DSI86: Hsync pin on the eDP display panel