• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 32 subscribers
  • Views 221 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS90UB954-Q1: DS90UB954-Q1

Sam Sangani
Prodigy 160 points
Part Number: DS90UB954-Q1
Other Parts Discussed in Thread: ALP, USB2ANY

Hi,

We have 1080p60 CMOS sensor connected to DS90UB953 then via FPD-link III to DS90UB954. DS90UB954 is on our board but I2C lines are accessible. We would like run Margin Analysis Program (MAP) using an Analog LaunchPad software. Could you guide us what type of interface board we should use between our board and PC (USB), so an Analog LaunchPad can write & read necessary data?

Thanks,

Sam