AM26LS32AC: Minimum pulse width specification

Takeshi Sasaki

Expert 4480 points

Part Number: AM26LS32AC

Hi team,

Could you give me comments on the following customer questions?

Q1. Does AM26LS32ACNS have minimum input pulse width specification to be able to detect?

Q2. Does AM26LS32ACNS have minimum output pulse width specification to be able to detect?

Thank you for your support.

Best regards,

Takeshi Sasaki

over 6 years ago

0 Miguel Robertson over 6 years ago

TI__Guru 62920 points

Hello Sasaki-san,

While the device does not have such specifications, it is true that very fast pulses on the input may be filtered by the finite input bandwidth of the receiver. To be conservative, you could assume that pulses should be at least as long as the propagation delay through the device (i.e., 35 ns). Please let me know if this is not clear or if you have any further questions.

Regards,
Max

0 Takeshi Sasaki over 6 years ago in reply to Miguel Robertson

TI__Expert 4480 points

Hi Max,

Thank you for your suggestion. I think it's reasonable assumption. Thank you for your help.

Best regards,
Takeshi Sasaki

Interface

Interface forum

AM26LS32AC: Minimum pulse width specification