• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 33 subscribers
  • Views 243 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TUSB4041I: D+ and D- pins state when an overcurrent event happens.

msmn
Intellectual 805 points
Part Number: TUSB4041I

Our customer asked a question. When an individually port-power-controlled hub senses an overcurrent event (OVERCURz asserted), the hub reports the port's overcurrent event to the USB host and then the host sends Set_Feature(?) to switch off its downstream port's VBUS. When this happens, what is the D+ and D- pins state? H-Z state?

Regards

Masumi Saito