• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 32 subscribers
  • Views 156 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS25BR204: Thermal Resistances

Ron Harms
Prodigy 10 points
Part Number: DS25BR204

In the data sheet for thermal resistance, there is a Theta JC & Theta JA defined.  How is Theta JC defined? As the resistance between the junction temp and the top of the case? Or the resistance between the junction and the thermal pad?  Pending on how Theta JC is defined, is it also possible to get a Theta JB?

  • 0
    TI__Guru* 92880 points
    Hi Ron,
    Theta JC is the resistance between the junction temperature and top of the case where heat sink could be applied.
    Theta JB highly depends on the PCB board material/layout. You can back calculate Theta JB as follows:
    TJ = Board temperature + Theta JB X Power
    Regards,,,nasser